K gold and platinum polishing process

K gold and platinum polishing process
Inlaid gemstone jewelry in not a good polish before the metal surface is very rough, gem-polishing process in any case will be in fine jewelry hit the surface of finely ground leaves some minor file marks, sand scratches polished end, when the milling orifice , side of the drill hole marks, trim marks the edge of the shovel, clamp marks left by the clip, a small welding welding residual scar. Currently inlaid jewelry 18K gold, 14 platinum and other jewelry and K are mechanical polishing cloth wheel, this is jewelry surface treatment of the most important aspect of the jewelry polished surface should be very light, gives a dazzling beauty. Of course, there is a certain mechanical polishing techniques to a variety of cloth with wax and polishing wheels, polishing time does not throw the longer the better, both throwing too bright to make jewelry, but also reduce the production of precious metal tiffany charm bracelet tray loss.

First, the use of machinery and tools for polishing Name

Polishing machine, hanging play tube, yellow cloth wheels, white wheels, big brush, velvet mandrel, a small brush, small white round, straight brush, green wax, wax, red wax, drum machines, small round iron beads, small No. UFO, polishing powder, rust powder.

the polishing is polishing jade processing the final steps

 the polishing is polishing jade processing the final steps. The purpose of polishing is to be processed in addition to jade pieces before the procedure because of the traces left on the surface, and get smooth and bright surface, while Jade's precisely correct geometry, so that more perfect form, even more to the design requirements. Made of wax mound with five, six mound made of leather and leather polishing tool mound (60 years, a new mountain jade products made of bamboo or camphor mound five or six mound tool polishing), so that products meet light lubricating , bright individual products to achieve the degree of transparency. Then wash wax, wax products in the polishing of jade is usually into the line after a process, in fact, this is not the jade material processing operations, but the tiffany & co earrings treatment processes. Also known as wax before the wax. Waxing can not only make the surface more smooth jade, you can also hide cracks. For porous materials such as jade, turquoise, etc., can also play against pollution, increase the structural stability and improve the color effect. Methods of drying wax wax, wax stew two.

Fourth, with the seat according to product and customer requirements, jade products for additional base. Production base in mahogany. Jade finished by the different themes cut system modeling design patterns, and rasp smooth. By the bottom of the shape, embedded in the wood on and off. Finally, light paint.

ade production process

ade production process
Jade products, shape or style, are made through the pondering process. Jade processing, although there may be many processing details differ, but generally speaking are nothing more than a material, water for, three polishing process.

First, the sawing machine is expected to open jade material will be divided into the appropriate shape and size, so that rational use of jade craftsmen. This is the jade processing the first process. Visual jade external, to identify defective at the first open a mound, about jade internal "condition", the initial digging for Qubing dirty, then material quality, texture and size can be achieved, open to different specifications of the material blank try to make it big timber Dayong. Mountain sub-carved, carved with the shape, no open tiffany charm bracelet.

Second, the water is jade processing for pondering the second process. A jade style is the key to pondering the merits of whether or not the quality. Separation of coarse blank, blank out the fine, hand (cut bottle furnace system, said relief decoration of the surface) the three processes. There are also bottles of furnace technology, bird craft, people process the points.

Blasting

Blasting
Blasting process is a metal jewelry pieces, according to design requirements of local sand surface, the metal jewelry in sharp contrast to the polished surface to enhance the aesthetic lines of jewelry. Jet noise process in two ways: First, the dry sand, two water sand.

First, the main tool required for blasting

① sandblasting machine; ② air compressor; ③ silicon carbide (sand); ④ protective tape or protective wax

Second, the steps

1, after the polishing and cleaning the jewelry pieces that do not need to blast the site with a protective wax or protective tape sealed for protection. Protection point of protective tape or paste wax, the lines should be smooth, neat.

2, required to select the appropriate thickness of the tiffany charm bracelet, on the blasting machine. Then the air pressure needed for debugging.

3, broken pieces of hand-held jewelry, the site will need to put sand blasting machine, sand blasting machine aligned mouth open pressure valves, air pressure through the spray diamond jewelry pieces in metal, spray up to meet the requirements . Blasting bits are set, requires a full, uniform, in order to achieve the desired effect.

polishing

polishing
Pondering the shape of jade good design, but also into line polishing. Polished and refined the specific operation, but use the tools and abrasives (ie, polishing agents) with refined is different.

over the wax and mounted desert
After polishing the tiffany charm bracelet typically requires over wax. Been described earlier in wax method and is similar to. Only when it was introduced from the liquid wax, be careful of excess wax, especially jade products concave seam wipe-clean, etc., so that jade crafts shine.

For jade crafts, the wax is not the end too, need the wood seat and accompanied by the appropriate palette, complete the jade decorating, truly over.

Hook of the stomach

The so-called red, is the larger area of ??the grinding. With a blunt punch (diameter 3 ~ 4cm) or a diamond wheel into the rugged part of the red jade rough blanks.
The so-called grinding, is blunt with a different grind size of a large sample, that grind the main part of the design outline shape, such as the character's head, hands and body, and so on.
The so-called rolling, is the depth of grinding, that is rolling a blunt rolled out a smaller part of the three-dimensional, such as to the characters head and face, rolling out of the mouth, nose, ears and so on.

Hook of the stomach, which is delayed thallium tick tick subtle pattern detail, such as the character's hair and Toba Interfax and so on. Detail of carving mill also be removed, tuck and contradict other techniques, which used to be carved grinding tool and a wide variety of different roles, in addition to red thallium, thallium grinding, rolling, thallium, thallium hook, there are series hammers, nails, rods Ting, flat, and so on. These tools are the traditional jade carving tool name, the past is made of iron, silicon carbide will be used to drive jade figured it out. Now more than fixing the diamond powder using a tool, a lot of efficiency.

Jade stone grinding, often using specialized equipment jade. tiffany heart pendant equipment work mainly by motor head, belt drive, grinding head, sink, and the toolbox and so on. Motor and link together the work of the head with a steel column, which can lift. Belt drive motor drive in, the drive of the grinding work of the first left turn. By grinding for different purposes to achieve different pondering. That is, various shapes of grinding abrasive. Most are electroplated diamond grinding head, grinding because of its high efficiency, long life, price is not expensive.

pondering

pondering
Pondering is based on the design requirements of the shape of a big process, the operation is usually divided into two sub-grinding cutting and carving process.

Cutting process is relatively simple, that is, remove the stone with leather cutting tools (if any) and outline the design other than odd bits. Moreover, we have dredged the defects can not be used or dirty spots, remove impede the design of the "sand D" or miscellaneous stone, and so on. Finally, get a prototype of the tiffany heart necklace and bracelet material billet begun. Jade carving industry within this procedure in some of the basic techniques have special names, such as voltage, invited for, buckle and so on. Voltage is cut, cut unwanted parts; invited for is to edges and corners; point deduction is to be dredged dirty or "sand small" miscellaneous stone. In fact, this approach is also used for carving grinding process. Cutting tools are mainly from the cutting action of the voltage blunt, chisel thallium, wire sub-saws, saws, buckle live machine and so on.

Eagle Mill is the shape of the design process, the basic techniques and procedures are red, grinding, blunt hook, etc.